0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
For Use With KB's Roman Tub Filler BEFORE BEGINNING INSTALLATION 1. Flush pluming lines to clear any debris. 2. Shut oft both supply lines after flushing. [1] [2] 4. Shut off the hot and cold water supply. Removes old faucet If applicable. 2. Remove the lockout and washers from the spout shank. Attach the spout shank Io the spat and secure by frightening set screw in the back uf the spout 3] Lock Nut—&> Metal Lock Nut—&D Apply Teflon tape —/ & 3. Insert the spout shank and spout through the opening.
Parts: Replacement Parts: g Hot Cartridge: KC1000H g Cold Cartridge: KC1000C © 1647 18 “e-1 20 S 22 Hot Handle: KCH361H Cold Handle: KCH381C ) % CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing.