0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser’s receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
KINGSTON KA H AT INSTALLATION INSTRUCTIONS Need Tools: Pot Filler BEFORE BEGINNING INSTALLATION: Marking Pencil Allen Wrench Teflon Tape Rawer Drill Hammer Screwdriver 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet. 2. Tum on old faucet to remove any excess water in the supply lines. Apply Teflon tape onto both threads of supply elbows. 7.
Parts: Replacement Parts. 3 Cartridge: KSRPL200OHC &2 ¢ Handle KBH1791AXC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Uso a silicon based caulking when installing. 2. Clean your faucet with only a mild soap and water solution. 3.