P-Trap Installation: 4. Waste Cover 3. Slip Joint Nut 6. Horizontal Leg 5. Black Washer 8. Tail Piece 1. Slip Joint Nut 2. Black Washer 7. Bottle Trap Remove horizontal leg and slip joint nut from bottle trap. Apply Teflon tape to all exposed threads. Insert slip joint nut (3) and waste cover (4) onto horizontal leg (6). Insert horizontal leg into wall waste opening, do not tighten. Insert black washer (2) and slip joint nut (1)onto tail piece (8).
FAUCET INSTALLATION INSTRUCTIONS Console Sink Legs Before Installation : 1. Unpack your new Kingston Brass product and inspect it keep the product in its original package until you are ready fo install it. Shut the water supply off when replacing an existing fixture. Preparation of the floors and walls, including all additional wall supports, maybe required. Observe all local plumbing and building codes. It is recommended that you enlist the assistance of a second person to install this unit.
FAUCET INSTALLATION INSTRUCTIONS Console Sink Granite/Marble Care & Maintenance Your new granite/marble vessel top has been factory sealed and polished to a smooth glass finish. In order to maintain the surface and keep it looking fresh and natural, we recommend the following procedures: 1. All stone products require a resealing at least once a year. Since your top has already been sealed at the factory. You will need to schedule your top for resealing accordingly. 2.
KINGSTON KITCHEN IR BATH Shelf Installation Parts: Mounting Screw 4 Pcs sacs serious jitney Installation Instructions for shelf only: counting Bracket | 1. This shelf is designed to be installed on console legs. 2. Wood bracing with thickness behind the wall is needed for securing the mounting brackets. CAUTION Radius to-fellow all installation directions.