Pop tlt FAUCET Lavatory Faucet Hole 4. Waste Cover 6. Horizontal Leg 1. Slip Joint Nut 3. Slip Joint Nut 2. Black Washer 5. Black Washer 7. Bottle Trap Attach bottle trap (7) to tail piece and hand tighten slip joint nut (1). Anchor Align bottle trap with horizontal leg and tail piece, at this point it may be necessary to cut part of tail piece or part of horizontal leg to obtain proper 1. Remove horizontal leg and slip joint nut from bottle trap. 2. Apply Teflon tape to all exposed threads. 3.
FAUCET INSTALLATION INSTRUCTIONS Console Sink Legs Before Installation : 1. Before beginning the installation of your console pedestal basin, it is important to identify the type of wall where the pedestal will be installed and prepare the installation location accordingly. 2. Install an anchoring brace in the wall prior to installing the drywall, this can piece of wood that will fit between the two studs, then install drywall and finish as usual.
FAUCET INSTALLATION INSTRUCTIONS L Shape Mounting Bracket Need Tools: Phillips Screwdriver Hammer Silicone Pencil Drill Note: If the basin is going to be installed on console base which has 4 legs standing on floor, the bracket could be optional. Installation: 1. Once unit has been assembled place at the desired location. 2.