P-Trap Installation: Lavatory Faucet Hole & 4. Waste Cover = 6. Horizontal Leg 1. Slip Joint Nut 2. Black Washer 3. Slip Joint Nut 7. Bottle Trap J 5. Black Washer Remove horizontal leg and slip joint nut from bottle trap. Apply Teflon tape to all exposed threads. Insert slip joint nut (3) and waste cover (4) onto horizontal leg (6). Insert horizontal leg into wall waste opening, do not tighten. Insert black washer {2} and slip joint nut (1)onto tail piece (8).
FAUCET INSTALLATION INSTRUCTIONS Console Sink Legs Before Installation : 1. Before beginning the installation of your console pedestal basin, it is important to identify the type of wall where the pedestal will be installed and prepare the installation location accordingly. 2. Install an anchoring brace in the wall prior to installing the drywall, this can piece of wood that will fit between the two studs, then install drywall and finish as usual.
FAUCET INSTALLATION INSTRUCTIONS CONSOLE SINK Granite/Marble Care & Maintenance Your new granite/marble vessel top has been factory sealed and polished to a smooth glass finish. In order to maintain the surface and keep it looking fresh and natural, we recommend the following procedures: 1. All stone products require a resealing at least once a year. Since your top has already been sealed at the factory. You will need to schedule your top for resealing accordingly. 2.