0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet ars warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and for damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
N INSTRUCTIONS For Use With KB's Twin Handles Kitchen Faucet with or without Sprayer BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Sprayer Hose 1. Shut off hat and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Removes old faucet. 2. Inge rt the inlet shanks through the sink holes, and press down. Assemble the washers and lockouts an the inlet shanks, and then tighten the nuts by hand.
Replacement Parts: Parts: aw Cartridge: KBRF101C % Hot Handle: KBH1791 AXH Nwamm~y @ v Cal Handle: KBH1781 AXC \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing.