0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten{10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Tub/Shower Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. 1 Properly secure valve body to wood bracing using copper straps. (not included) Turn off water supply. Connect valve assembly to 1/2" supply lines. Tailpieces on valve assembly are threaded for 1/2" threaded pipe and will accept 1/2° sweat copper. Assemble 1/2" elbow and 1/2" feed nipple. Screw into bottom of valve.
Replacement Parts: Parts: €c2 Hat Cartridge: KBRP131HC € Ca old Cartridge: KBRP131CC| @e= Diverted Cartridge: KBRP131CD 7 Hot Handle KBHG01 ALH 7 Cold Handle: KBHEQ1ALC 7 Diverted Handle: KBDHED1 AL \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time.