0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet ars warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
1.Fl = INSTALLATION INSTRUCTIONS For Use With KB's Twin Handles Lavatory Faucet with or without Pop-Up BEFORE BEGINNING INSTALLATION ush plumbing lines to clear any debris. 2. Shut off bath supply lines after flushing, [1] (2] 1. Shut off hot and cold war supply under sink. Plug sink drain with cloth to avoid In sing small parts. Remove old faucet 2. Instar the inst shanks through the sink holes, and press down. Assemble the washers and lockouts on tha inlet shanks, and then tighten the nuts by hand. g\zfihm
Replacement Parts: g Cartridge: KBRF101C Ry Handle: KBH1E01PL Parts: CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2. Clean your faucet with only a mild soap and water solution 3.