0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
For Use With KB's Roman Tub Filler BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut oft both supply lines after flushing. [1] [2] 4. Shut off the hot and cold water supply. Remove old faucet If applicable. 2. Remove the lockout and washers from the spout shank. Attach the spout shank Io the spout and secure by frightening set screw in the back uf the spout 3] Lock Nut—&> Metal Washer) Lock Nut—&D Apply Teflon tape —/ © 3.
Parts: Replacement Parts: £ Hot Cartridge: KBRP131HC 5 Cold Cartridge: KBRP131CC| ® Hot Handle: KCHBE361H Er Cold Handle: KCHB361C CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.