0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warrants to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as Shawn on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage fulfilling from improper installation, repair or replacements, as wall as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Twin Handles Kitchen Faucet with or without Sprayer BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing Sprayer Hose 1. Shut off hot and cold water supply under small parts. Remove old faucet. sink. Plug sink drain with ciabatta to avoid losing 2. Insert the Inst shanks rough the sink holds, and press down. Assemble the washers and lockouts on the Inlet shanks, and then Brighten the nuts by hand.
Replacement Parts: 8 Cartridge: KERP101C B Hot Handle: KBHB21H N Cold Handle: KBHE21C Parts: \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2.