0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: INSTALLATION INSTRUCTIONS For Use With KB's Widespread Single Handle Kitchen Faucet With or Without Sprayer Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. [1] —— Spat —— Rubber Washer | = | Sink c B — Nut ) Longhorn) Cold(Short) 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth bo avoid losing small parts.
Replacement Parts: Parts: Cartridge: KBRP521C Handle: KBHE710 \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.
le ee Soap Dispenser Installation www laughingstock TOLL-FREE CUSTOMER SERVICE: 1-877-2-BRASS TECHNICAL SUPPORT E-mail: 12775 Reservoir Street, Chino, CA91710 TOOLS REQUIRED ep Basin Wrench &==32 Adjustable Wrench B— Hammer ~N Marking Pencil Su Phillips Screwdriver Nozzle Pump 4 Pipe 1. Install pipe into soap pump. Insert soap dispenser sleeve through sink hole and secure with washer and nut 5] 5. Pour in liquid soap { or hand lotion) Note: This product is used to illustrate installation.