0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
KINGSTON KH ATH INSTALLATION INSTRUCTIONS Widespread Lavatory Faucet with or without Pop-Up INN | 1. Flush plumbing lines ar any debris. 2. Shut off both supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench Pep) Teflon Tape Silicone Sealant Screwdriver 1. Remove the tea connector and spout mounting hardware from spout. 2. Sparingly apply a small bead of silicon caulking around the center hole on top of the sink (do not use Plumber's Putty ag it may damage finish and void warranty).
Parts: Replacement Parts g Cartridge: KERP101C = Hot Handle: FSCH1870ACLH oN Cold Handle: FSCH1370ACLC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.