P-Trap Installation: 12 Lavatory Faust Hols 2 4. Waste Cover 6. Horizontal Leg 1. Slip Joint Nut 2. Black Washer 7. Bottle Trap g 3. Slip Joint Nut 5. Black Washer . Remove horizontal leg and slip joint nut from bottle trap. . Apply Teflon to all exposed threads. . Insert slip joint nut(3) and waste cover(4) onto horizontal leg(6). . Insert horizontal leg into wall waste opening, do not frighten. . Insert black washer(2) and slip joint tail piece(8). .
FLATULENCE KINGSTON CREATION INSTALLATION INSTRUCTIONS For Use Natural Stone Vanity Top Granite Marble Care & Maintenance Your new granite/marble basin top has been factory sealed and polished to a smooth glass finish.In order to maintain the surface and keep it looking fresh and natural, we recommend the following procedures: 1. All stone products require a resealing at least once a year. Since your top has already been sealed at the factory. You will need to schedule your top for resealing accordingly. 2.
P-Trap Installation: 12 Lavatory Faucet Hols 4. Waste Cover 6. Horizontal Leg 8. Tail Piece 1. Slip Joint Nut 2. Black Washer 7. Bottle Trap 3. Slip Joint Nut 5. Black Washer 1. Remove horizontal leg and slip joint nut from bottle trap. 2. Apply Teflon to all exposed threads. 3. Insert slip joint nut(3) and waste cover(4) onto horizontal leg(8). 4 Insert horizontal leg info wall waste opening, do not tighten. 5. Insert black washer(2) and slip joint tail piece(8). 6.
apse Rte INSTALLATION INSTRUCTIONS For Use KB's WASH BASIN PEDESTAL Before Installation : 1. Prior the installation, unpack your new Kingston Brass product and inspect it keep the product in its original package until you are ready to install it. 2. Shut the water supply off when replacing an existing fixture. Preparation of the soars and walls, including all additional wall supports, maybe required. 3. Observe all local plumbing and building codes. 4. Do not install this fixture alone. 5.