0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet ars warranted to the original retail purchaser fo be free from defects in material and workmanship for & period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: INSTALLATION INSTRUCTIONS ¢ % @E % For Use With KB's Widespread Lavatory Faucet with Pop—Up Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant ~ Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush pluming lines ta clear any debris. 2. Shut off both supply lines after flushing, Drain Plug Sink Drain Flange Opening Teflon Tape pwning Mounting O N N Pivot Rod Opening 1. Shut off hot and clad water supply under sink. 2. Install new faucet shank through the center 7.
Parts: Replacement Parts: : Hot Cartridge: KS1000H : Cold Carl ridge: KS1000C 2% Hot Handle: KSHATRIYA TXH 2k Cold Handle: KSH7881TXC \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.