KINGSTON THE TRADITION OF WINE BRASS Installation Instructions For Use With KB's Straight Stop Instructions: 1. Apply thread sealant tape to threads (1). 2. Screw valve body (2) onto pipe (3). 3. Place nut (4) and ring (5) on tube (6). 4. Insert tube (6) into valve. 5. Wrench tighten nut (4) onto valve. 6. Stop any leaks by tightening nuts slightly. 4 5 8 www.kingstonbrass.
KINGSTON BRA. THE TRADITION Installation Instructions For Use With KB's Decorative P-Trap Instructions: 1. Remove horizontal leg and slip joint from bottle trap. 2. Apply Teflon to all exposed threads. 3. Insert slip joint nut(3) and waste cover(4) onto horizontal leg(6). 4. Insert horizontal leg into wall waste opening, do not tighten. 5. Insert black rubber washer(2) and slip joint tail piece(8). 6. Attach bottle trap(7) to tail piece and hand tighten slip pint nut(1). 7.
Installation manual for hand shower Put a washer lo the cone shape hose nut and hand titans the hand shower clockwise. 2. Turn on the water and check for leaks, If the hand shower leaks at the connection to tha hos, hand Ugh ten the inaction some mots. Installation manual for pull-out & pull-down sprayer. 1] 3 0 (2] 1. Thread hose to spray head and fade from the lop Ina e faucet spout, tum the spout to the right or to the left fully to facilitate the insertion of the hose. 2.
INSTALLATION INSTRUCTIONS For Use With KB's Han Shower Sets, Shower head Sets Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant and Kitchen Sprayer fi Before installation: % Flexibly Watt Hold the existing shower arm up and down to ensure Ihe plumbing behind the wall is Pipe Wrench Screwdriver d Plumber's Putty rigid lo half the wait of the new shower unit about 3-4 |bs when filled with water. Installation manual for shower arm & shower head: Place tha fang lino the shower rod.