0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as Shawn on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: i INSTALLATION INSTRUCTIONS For Use With KB's Basin Faucet = Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant ~ Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Lock Nut == 1. Shut off hot and cold wale supply under 2. Inge rt the inlet shanks through the sink ยง. Turn on water supply valves and sack 6. Remove aerator and turn on both hot sink. Plug sink drain with cloth to avoid holes, and press down.
Replacement Parts: . Hot Ca ridge: KSRPL1101HC Cold Cartridge: KSRPL1101CC 7= Hot Handle: KSH3851PXH = Cold Handle: KSHATRIYA PXC Parts: \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.