0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet ars warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Deck Mount Twin Handles Kitchen Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines lo clear any debris. 2. Shut off both supply lines after gushing. Ned Tools: Teflon Tape Basin Wrench Adjustable Ranch Silicone Sealant Screwdriver Apply Teflon tape 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Removal old faucet. 2 Apply Teflon tape on the threads of the caper shank. Install the elbow.
Replacement Parts: Parts: Hat Cartridge DISRUPT! 000HC ! é Cold Cartridge: KSRPT1000CC Hot Handle: KB 781 AXH % Cold Handle: KBH1791 AXC \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.