0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
For Use With KB's Wall Mount Twin Handles Kitchen Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after Rushing. [1] 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid In sing small parts. Remove old faucet. 2. Turn on old faucet to remove any excess water in the supply lines. Apply Teflon tape onto both threads of supply elbows. 3. Ra move elbow from faucet hod and Install to water outlet on wall. 4.
Parts: Replacement Parts: Hot Cartridge KSRPL2000HC Cold Carbides: KSRPL2000CC Handle: KBH1601 AL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.