0 YEAR MANUFACTURER'S KIN LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as Shawn on the purchaser's receipt OF FINE BRASS This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Coals: INSTALLATION INSTRUCTIONS For Use With KB's Twin Handles Lavatory Faucet with Pop-Up Basin Wrench Adjustable Wrench Teflon Tape Slickness Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Pivot Rod S /Hale Nut—ED 1. Shut off hot and cold water supply under 2. insert the inlet shanks through tha sink 7. Claps pivot rod into pivot rod opening. 8. Guido the pivot rod through one of the sink.
Replacement Parts: ¢ Cartridge: KSRP101C 2 Hot Handle: KBH1601BEXH B Cal Handle: KBH1B01BEXC| \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.