0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
KIN INSTALLATION For Use With KB's Drinking Water Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. 1 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid posing small parts. Remove old faucet 2. Set the faucet in place, insert the inlet shanks through the sink holes, and press down. I Flexible Water Supply Lines Shut off valves 3.
Replacement Parts: Parts: = Carl ridge: KSRP3191C Handle: KSH3191NML CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.