0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
BEFORE BEGINNING INSTRUCTIONS For Use With KB's Roman Tub Filler INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off bole supply lines after flushing. 1 2 1. Shut off hot and cold water supply. 2. Attach Shank on the spout body. Remove old faucet Note:Use Teflon Tape on water connections, 3 4 Washer —C> Lockout —& Tee A 3. To keep spout loom rotating after 4. Apply Teflon tape to all valve stem inlets and installation, screw brass pin into spout base.
Parts: Replacement Parts: Handle: KSH2241MR CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3. Dry your faucet after using it 4.