0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet ars warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and for damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Basin Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver (1] 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid Nosing small parts. Remove old faucet 2. Instar the inst shanks through the sink holes, and press down. Assembly the and then titan the nuts by hand.
Replacement Parts: 5 Hot Cartridge: KSRPL1000HC 5 Cold Carl ridge: KSRPL1000CC 325 Hot Handle: CCCX1CSH 520 Cold Handle: CCCX1CSC Parts: \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.