0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warrants to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the tads of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as wall as incidental and consequential damages connected therewith are excluded.
e s INSTALLATION INSTRUCTIONS For Use With KB's Roman Tub Filler Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. [t 1. Shut aff hot and cold water supply. Remove old faucet Washer ' Crass Washer Lock Nut 2. To keep spout loom totaling after installation, screw brass pin into spout base. Then place spout escutcheon on spout lube hub. Place mounting washer on spout shank end attach with spout shank lockout & ’\\j Hals the handles
Replacement Parts: Parts: Hot Carl ridge: KSRPTS000HC Cad Carbide: KSRPTSDQDCC Handle: KSH1161PL . J CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.