0 YEAR MANUFACTURER'S KI KINGSTON LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free TOUGHEN BATH from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt.
KINGSTON KH ATH INSTALLATION INSTRUCTIONS Need Tools: Pot Filler BEFORE BEGINNING INSTALLATION: Marking Pencil ~~ Allen Wrench Teflon Tape Rawer Drill Hammer Screwdriver 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove oid faucet. 2. Tum on oid faucet to remove any excess water in the supply lines. Apply Teflon tape onto the threads of supply elbow. 7.
Parts: Replacement Parts : Cartridge: KSRPLS100HC : Diverted Cartridge: re | KSRPL5000HC Handle: KSH2861DFLH CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the Diverted Handle: KSH2961DFLC high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2.