0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
KINGSTON KH ATH INSTALLATION INSTRUCTIONS Twin Handles Wall Mount Faucet BEFORE BEGINNING INSTALLATION: 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Need Tools: Basin Wrench Adjustable Wrench ~~ Teflon Tape Fel) Silicone Sealant Screwdriver 1 2] 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet. 2. Tum on old faucet to remove any excess water in the supply lines.
( Parts: Replacement Parts Hot Cartridge: KC1000H g Cold Cartridge: KC1000C or Hot Handle: KSH3221PLH Cold Handle: KSH3221PLC CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when nettling, 2.