0 YEAR MANUFACTURER' KINGSTON BRASS LIMITED WARRANTY Al parts of this Kingston Brass faucet are wanted fo the original retail purchaser to be freak e el R from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. ‘This warranty is limited to defective pairs only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
For Use With KB's Drinking Water Faucet Need Tools: Pef) Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris 2. Shut off both supply lines after flushing. 1 5 6 parts. Remove oid faucet. 1. Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small 2. Set the faucet in place, insert the inlet shanks through the sink holes, and pass down.
Parts: Cartridge: KSRP8191C Handle: KSH8191NYL \ J CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Uso a silicon based caulking when installing. 2. Clean your faucet with only a mild soap and water solution. 3.