0 YEAR MANUFACTURER'S KI KINGSTON LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser o be free EUTHENICS BATH from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser’s receipt.
KINGSTON KA H AT INSTALLATION INSTRUCTIONS Single Handle Faucet with or without Push Drain Need Tools: BEFORE BEGINNING INSTALLATION: Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. 1 6 PUSH Shut off hot and cold water supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove oid faucet 2. Insert the inlet bolt through the sink holes, and press down.
Parts: . Replacement Parts Cartridge: KSRP3891C Han die KSH7811BL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Uso a silicon based caulking when installing. 2. Clean your faucet with only a mild soap and water solution. 3.