0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting farm improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: with or without Sprayer Basin Wrench Adjustable Wrench ~ Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after fishing. Shut off hot and cold water supply under 2. Spt the faucet In claps, Insert the Inlet shanks 7. Install spray hose end Io the top of the 8. Remove aerator and turn on both hot and sink. Plug sink drain with cloth to avoid through the sink halos, and press down.
Replacement Parts: Parts: Hol Carl ridge: KSRP1281HC Cold Cartridge KSRP1281CC Handle: KSH3801AL . J CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2.