0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defaces in material and workmanship for a period of Ten(10) years from the date of purchase as shown an the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: For Use With KB's Twin Handles Kitchen Faucet M %fi %& with or without Sprayer Basin Wrench ~ Adjustable Wrench ~ Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Spray Hiss 1. Shut off hot and cold water supply under 2. Set the faucet in place, insert the inlet shanks 7. Install spray hose end Io the top of the 8. Remove aerator and turn on both hot and sink.
Replacement Parts: Parts: Hot Carl ridge: KSRP1281HC Cold Cartridge: KSRP1281CC v Hart Hands: KSH7611 LATH 5 Cold Handle: K§H7611TALC| \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.