0 YEAR MANUFACTURER'S KINGSTON BRASS LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free ez lie e s from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser’s receipt.
For Use With KB's Twin Handles Wall Mount Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. 1 Properly secure valve body to wood bracing using copper straps. (not included) Tum off water supply. Connect valve assembly to 1/2" supply lines. Tailpieces on valve assembly are threaded for 1/2" threaded pipe and will accept 1/2" sweat copper. Apply Teflon tape to spout thread. Install spout to faucet body and tighten it.
Parts: Replacement Parts: Hot Cartridge: KSRPLB00OH Cold Cartridge: KSRPL800OC i D = Han die: KSH8121CML 15@ land CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to coma. DO 1. Use a silicon based caulking when installing. 2.