0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt. This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: KINGSTON KH ATH INSTALLATION INSTRUCTIONS Lavatory Faucet with Pop-Up BEFORE BEGINNING INSTALLATION: Basin Wrench Adjustable Wrench ~~ Teflon Tape Silicone Sealant Screwdriver 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Lock Nut 2. Set the faucet in place, insert the inlet shanks through the sink holes, and press down. Assemble the washers and lockouts on the inlet bolts, and then tighten tha nuts by basin wrench. 1.
Cartridge: KSRP3891C et) Handle: GSH8411DL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards, however, due to the high content of minerals in the water, your finish may appear dull and famished after time. ese are some do's and don'ts to maintain the luster on your faucet for many years to come. DO 1. Use a silicon based caulking when installing. 2. Clean your faucet with only a mild soap and water solution. 3. Dry your faucet after using it. 4.