0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges candor damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
. sh INSTALLATION INSTRUCTIONS For Use With KB's Vessel Sink Faucet BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. ut off both supply lines after flushing. Basin Wrench ~~ Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver 1 Bolt = Rubber Washer. Ro Metal Washer. | Ny 4 Lockout: 1. Shut off hot and cold wale supply under sink. Plug sink drain with cloth to avoid losing small parts. Remove old faucet. 2. Insert the inlet bolt through the sink holes, and press down.
Replacement Parts: Parts: Cartridge: KSRP3891C Handle: KSHB471DL . J CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2. Clean your faucet with only a mild soap and water solution 3.