0 YEAR MANUFACTURER'S KIN LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as wall as incidental and consequential damages connected therewith are excluded.
For Use With KB's Widespread Kitchen Faucet with ar without Sprayer BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines ta clear any debris. 2. Shut aff goth supply lines after gushing. 1 1. Shut off hot and clad water supply under sink. Plug sink drain with cloth to avoid posing small parts. Remove old faucet. 2. Install new faucet shank through the center hole of sink. Place mounting washer on spout shank and attach with spout shank lockout. Rubber Gasket 3. Apply Teflon tee iothréhds on spout shank.
Replacement Parts: Parts: Hot Cartridge KSRPLS000HC Name Cold Cartridge: KSRPLS000CC Cold Handle: KSHATRIYA ZXC \ CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing.