P-Trap Installation: Lavatory Faucet Hole 4. Waste Cover 6. Horizontal Leg 1. Slip Joint Nu 3. Slip Joint Nut 2. Black Washer 5. Black Washer 7. Bottle Trap Remove horizontal leg and slip joint nut from bottle trap. Apply Teflon tape to all exposed threads. Insert slip joint nut (3) and waste cover {4) onto horizontal leg (6). Insert horizontal leg into wall waste opening, do not tighten. Insert black washer (2) and slip joint nut (1)onto tail piece (8).
FAUCET INSTALLATION INSTRUCTIONS Console Sink Legs Before Installation : 1. Before beginning the installation of your console pedestal basin, it is important to identify the type of wall where the pedestal will be installed and prepare the installation location accordingly. 2. Install an anchoring brace in the wall prior to installing the drywall, this can piece of wood that will fit between the two studs, then install drywall and finish as usual.
FAUCET INSTALLATION INSTRUCTIONS L Shape Mounting Bracket eed Tools: Tey, Py Sh NT Phillips Screwdriver Hammer Silicone Pencil Drill Installation: 1. 2. Once unit has been assembled place at the desired location. Gently place basin on top of pedestal legs and very carefully place in the location where the pedestal legs will be installed and after leveling draw a line across the bottom of the basin.