P-Trap Installation: 4. Waste Cover 6. Horizontal Leg 3. Slip Joint Nut I 5. Black Washer 1. Slip Joint Nut 2. Black Washer 7. Bottle Trap Remove horizontal leg and slip joint nut from bottle trap. Apply Teflon tape to all exposed threads. Insert slip joint nut (3) and waste cover (4) onto horizontal leg (6). Insert horizontal leg into wall waste opening, do not tighten. Insert black washer (2) and slip joint nut {1)onto tail piece (8).
FAUCET INSTALLATION INSTRUCTIONS Console Sink Legs Before Installation : 1. Before beginning the installation of your console pedestal basin, it is important to identify the type of wall where the pedestal will be installed and prepare the installation location accordingly. 2. Install an anchoring brace in the wall prior to installing the drywall, this can piece of wood that will fit between the two studs, then install drywall and finish as usual.
FAUCET INSTALLATION INSTRUCTIONS L Shape Mounting Bracket Need Tools: Phillips Screwdriver Hammer Silicone Pencil Drill Note: If the basin is going to be installed on console base which has 4 legs standing on floor, the bracket could be optional. Installation: 1. Once unit has been assembled place at the desired location. 2.