P-Trap Installation : [1] Lavatory Faucet Hole a
KINGSTON BRASS INSTALLATION INSTRUCTIONS For Vanity Tops and Console Sink Before Installation : 1. Prior the installation, unpack your new Kingston Brass product and inspect it keep the product in its original package until you are ready to install it. 2. Shut the water supply off when replacing an existing fixture. Preparation of the floors and walls, including all additional wall supports, maybe required. Observe all local plumbing and building codes. Do not install this fixture alone.
P-Tap Alton KINGSTON KITCHEN & BATH Lavatory Faucet Hole 8. Tail Piece 4. Waste Cover 6. Horizontal Leg 1. Slip Joint Nu 2. Black Washer 7. Bottle Trap Remove horizontal leg and slip joint nut from bottle trap. Apply Teflon tape to all exposed threads. Insert slip joint nut (3) and waste cover {4) onto horizontal leg (6). Parts; Insert horizontal leg into wall waste opening, do not tighten. Insert black washer (2) and slip joint nut (1)onto tail piece (8).
KINGSTON BATTEN SATIN INSTALLATION INSTRUCTIONS Bathroom Console Base Before Installation : 1. Prior the installation, unpack your new Kingston Brass product and inspect it keep the product in its original package until you are ready to install it. Shut the water supply off when replacing an existing fixture. Preparation of the floors and walls, including all additional wall supports, maybe required. Observe all local plumbing and building codes. Do not install this fixture alone.