0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS For Use With KB's Wall Mount Tub Filler BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after fishing. Need Tools: Faf) Basin Wrench Adjustable Ranch Teflon Tape Silicone Sealant Screwdriver 1] 6] 1. Shut off main water supply valve before Installation. 2. Inge rt the inlet shanks through the holes, and ยง. Turn on water supply valves and sack for leaks, 8. Tum on tha faucet and lat hot and cold water lo press down.
Parts: Replacement Parts: 5 Hot Carl ridge KSRRT4QDOHC 4 Cud Cartridge: KSRPT4000CC S Handle: AERIAL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2.