0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: KIN, INSTALLATION INSTRUCTIONS —p &= For Use With KB's Wall Mount Tub Filler With Hand Shower Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after gushing. Apply Teflon tape 8. Place a washer between the side hole of the shower cradle and the cons nut of the shower hos. Tighten the cone nut. 1. Shut off main water supply valve before installation. 2.
Replacement Parts: 5 Hot Cartridge KSRPT1000HC 4 Cold Cartridge: KSRPT1000CC Diverted Cadger KSRPT4100C Hot Hands: CCPL1H Cold Handle: CCPL1C . J CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1.