0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools. INSTALLATION INSTRUCTIONS % For Use With KB's Pull-Out Kitchen Faucet Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off hath supply lines after gushing. (1] Counter Weight Supply Tube & Hiss y B el Teflon tape 1. Shut off hot and cold water supply under sink. 2. After app; mq 4 bead af silicon based caulking to 5. Apply Teflon tape and thread supply lines to inlet lines, 8.
Replacement Parts: Parts: Carl ridge: KSRP3B91C Hands: KSH3571TL CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing. 2 Clean your faucet with only a mild soap and water solution 3.