0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Kingston Brass faucet are warranted to the original retail purchaser to be fees from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges and/or damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
INSTALLATION INSTRUCTIONS Need Tools. For Use With I,(B s \Spreader Lavatory Faucet Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver with or without Pop-Up BEFORE BEGINNING INSTALLATION 1. Flush both supply lines to clear any debris. 2. Shut off both supply lines after flushing. Drain Plug Flange Spout Mounting wanner Sink Drain Nut Hardware Opening ‘Washer Lock Nut Pivot Rod Tee Connector Opening 1. Remove the Tee Connector and spout mounting hardware from spout 2.
Parts: Replacement Parts: 8 Cartridge: KBRP101C 7 Hot Handle: KSH7811 LATH % Cold Handle: KSH7B11TALC| CARE AND MAINTENANCE OF YOUR FAUCET Your Kingston Brass faucet has been finished to the most strict standards; however, due tn the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.