User Manual

Document No. 480ADT2000.A00
DT2000
Page 6 of 17
3. How to use the DT2000 for the first time
The DT2000 is shipped with a default PIN of 11223344 and although it can be used straight out of the
box with the default PIN, for security reasons we highly recommend that you create a new User PIN
immediately by following the instructions under section 4 ‘How to change the User PIN’.
Follow the 3 simple steps in the table below to unlock the DT2000 with the default PIN.
Instructions (first time use)
LED
LED State
1. Press KEY button once
Red, Green & Blue LEDs will flash together once
and then the Red LED will continue to blink
2. Within 10 seconds, enter the User PIN
(default - 11223344) to unlock
the DT2000
Red LED will continue to blink
3. Press KEY button once
Red solid LED changes to Green solid LED
indicating successful default User PIN entry
4. How to change the User PIN
PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers, e.g. (3-3-3-3-3-3-3)
• Must not contain only consecutive numbers, e.g. (1-2-3-4-5-6-7), (7-8-9-0-1-2-3-4), (7-6-5-4-3-2-1)
Examples of these types of alphanumeric PINs are:
• For “password”, you would press the following keys:
7 (pqrs) 2 (abc) 7 (pqrs) 7 (pqrs) 9 (wxyz) 6 (mno) 7 (pqrs) 3 (def)
• For “kingston”, you would press:
5 (jkl) 4 (ghi) 6 (mno) 4 (ghi) 7 (pqrs) 8 (tuv) 6 (mno) 6 (mno)
This method enables you to create long PINs that are easy to remember.
Instructions
LED
LED State
Note: Once the DT2000 has been successfully unlocked, the Green LED will remain on and
in a solid state for 30 seconds only, during which time the DT2000 needs to be connected to
a USB port. It can be locked down immediately by pressing and holding down the KEY button
for 3 seconds, or waiting for the 30 seconds to expire or by clicking the ‘Safely Remove
Hardware and Eject Media’ icon within your operating system.
Password tip: You can create a memorable word, name, phrase or any other alphanumeric
PIN combination simply by pressing the key with the corresponding letters on it.