Datasheet

DESCRIPTION
SPECIFICATIONS
*Power will vary depending on the SDRAM used.
HX424C12PB3K4/64
64GB (16GB 2G x 64-Bit x 4 pcs.)
DDR4-2400 CL12 288-Pin DIMM
Continued >>
FEATURES
HyperX HX424C12PB3K4/64 is a kit of four 2G x 64-bit (16GB)
DDR4-2400 CL12 SDRAM (Synchronous DRAM) 2Rx8,
memory module, based on sixteen 1G x 8-bit FBGA
components per module. Each module kit supports Intel®
Extreme Memory Profiles (Intel® XMP) 2.0. Total kit
capacity is 64GB. Each module has been tested to run at
DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The
SPDs are programmed to JEDEC standard latency
DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
Maximum Operating Power
UL Rating
Operating Temperature
Storage Temperature
17 cycles
45.75ns(min.)
350ns(min.)
32ns(min.)
TBD W*
94 V - 0
0
o
C to +85
o
C
-55
o
C to +100
o
C
XMP TIMING PARAMETERS
•
JEDEC: DDR4-2400 CL17-17-17 @1.2V
•XMP Profile #1: DDR4-2400 CL12-14-14 @1.35V
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD = 2.25V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.661” (42.20mm)
Document No. 4808007-001.A00 06/09/17 Page 1
hyperxgaming.com
HX424C12PB3K4/6
4
6
4
G
B
(
16
G
B 2
G
x 64-Bit x 4 pcs.
)
DDR4 2400
CL
12 288 Pin DIMM
Memory Module Specifications