IRONKEY™ ENTERPRISE S1000 SECURE USB 3.
Quick Start 3 Mise en route 3 Kurzanleitung 4 Inicio rápido 4 クイックスタート 5 빠른시작 5 快速入门 6 快速入門 About my device How is it different than a regular flash drive? What systems can I use it on? How secure is it? Product specifications Recommended best practices 6 7 7 8 9 10 10 Using my device Setting up the device Unlocking and locking the device Managing passwords Accessing my secure files Updating my device Reformatting my device Using my device on Linux Finding information about my device Using o
QUICK START Enterprise devices must be set up using a Windows or Mac operating system. Once set up, you can use your device on Windows, Mac, or Linux systems. For more information about using your device on Linux, see ―Using my device on Linux‖ on page 17. Windows & Mac Setup (Windows 10, 8/8.1, 7 (SP1), Vista (SP2) or Mac OSX 10.9.x - 10.11) 1. Plug the device into your computer’s USB port. 2. When the Device Setup window appears, follow the on-screen instructions.
KURZANLEITUNG Geräte-Setup bei Windows und Mac (Windows 10, 8/8.1, 7 (SP1), Vista (SP2) or Mac OSX 10.9.x - 10.11) 1. Stecken Sie das Gerät in den USB-Port Ihres Computers 2. Wenn sich das Fenster „Geräte-Setup― öffnet, folgen Sie den Anweisungen auf dem Bildschirm. Wenn sich dieses Fenster nicht öffnet, dann öffnen Sie es wie folgt manuell: • Windows: Start > My Computer > IronKey Unlocker > IronKey.exe • Mac: Finder > IronKey Unlocker > IronKey 3.
クイックスタート Windows および Mac のセットアップ (Windows 10, 8/8.1, 7 (SP1), Vista (SP2) or Mac OSX 10.9.x 10.11) 1. デバイスをコンピューターの USB ポートに挿入します。 2. [ デバイスのセットアップ ] 画面が表示されたら、画面上の指示に従ってください。 この画面が表示されない場合は、手動で開いてください。 • Windows の場合 :[ スタート ] > [ マイ コンピューター ] > [IronKey Unlocker] > [IronKey.exe] • Mac の場合 : [ セレクタ ] > [IronKey Unlocker] > [IronKey] 3.
快速入门 Windows & Mac 安装 （Windows 10, 8/8.1, 7 (SP1), Vista (SP2) or Mac OSX 10.9.x - 10.11） 1. 将设备插到电脑 USB 接口。 2. 显示设备安装窗口后，按屏幕上的说明进行操作。 如果窗口未显示，可手动将其打开： • Windows： 开始 > 我的电脑 > IronKey Unlocker > IronKey.exe • Mac：Finder > IronKey Unlocker > IronKey 3. 设备安装完成后，可以将重要文件移动到 “ 安全文件 ” 驱动器中，文件会自动加密 首次插入设备后，某 Windows 系统会提示重新启动 您可以放心关闭此提示，且无需重新启动，因为系统并未安装 任 何新的驱动程序或软件。 快速入門 Windows 與 Mac 設定 （支援系統為：Windows 10, 8/8.1, 7 (SP1), Vista (SP2) or Mac OSX 10.9.x - 10.11） 1. 將裝置連接到您的電腦 USB 連接埠。 2.
IronKey™ Enterprise S1000 is a USB (Universal Serial Bus) 3.0, portable flash drive with built-in password security and data encryption. IronKey Enterprise S1000 is designed to be the world’s most secure USB flash drive. Now you can safely carry your files and data with you wherever you go. Figure 1: S1000 device Your device (once set up) will be connected to the IronKey Enterprise Management System that manages your organization’s IronKey devices.
E Password-Protected To access your secure data, you unlock the device with a password using the Unlocker software that is carried on the device. Do not share your password with anyone. That way, even if your device is lost or stolen, no one else can access your data.
E HOW SECURE IS IT? The IronKey Enterprise S1000 has been designed from the ground up with security in mind. A combination of advanced security technologies are used to ensure that only you can access your data. Additionally, it has been designed to be physically secure, to prevent hardware-level attacks and tampering, as well as to make the device rugged and long-lasting. The IronKey Cryptochip is hardened against physical attacks such as power attacks and bus sniffing.
E PRODUCT SPECIFICATIONS For further details about your device, see the Device Info page in the IronKey Control Panel. See ―To view device information‖ on page 19. Table 1: S1000 Device Specifications Specification Details Capacity 4G, 8G, 16G, 32G, 64G, 128G Dimensions 82mm X 21.1mm X 9.1mm Weight 1.
E • before the system enters sleep mode 3. Never unplug the device when the LED is on. 4. Never share your device password. 5. Perform a computer anti-virus scan before setting up the device.
E Enterprise devices must be set up using a Windows or Mac operating system. Once set up, you can use your device on Windows, Mac, or Linux systems. The setup process is the same for systems running a Microsoft Windows or Mac operating system. To setup the device 1. Plug the IronKey device into your computer’s USB port. The Device Setup screen appears. The setup software runs automatically from the public volume. This screen may not appear if your computer does not allow devices to autorun.
E To install the Auto-Launch Assistant 1. Unlock your device and click the Settings button on the menu bar. 2. Click Tools from the left side bar, and then click Install Auto-Launch Assistant. Tip: To uninstall the Assistant, click Uninstall Auto-Launch Assistant. UNLOCKING AND LOCKING THE DEVICE Unlocking the device The unlock process is the same for Windows and Mac systems. For Linux systems, see ―Use my device on Linux‖ on page 17.
E 2. Click Preferences in the left sidebar. 3. Type the message text in the Unlock Message field. The text must fit the space provided (approximately 7 lines and 200 characters). Locking the device Lock your device when you are not using it to prevent unwanted access to your secure files on the drive. You can manually lock the device or, if enabled in policy by your System Admin, you can set the device to automatically lock after a specified period of inactivity.
E MANAGING PASSWORDS Password settings are determined by an administrator. Sometimes you may be required to change your password to comply with new corporate password policies. When a change is required, the Password Change screen will appear the next time you unlock the device. If the device is in use, it will lock and you will have to change the password before you can unlock it. If you forget your password, see ―Accessing my device if I forget my password‖ on page 16.
E • When the keyboard focus is in a password field, press CTRL+ALT+ V. 2. Click the keys to type your password, and then click ENTER. You can also use the Virtual Keyboard in conjunction with the actual keyboard, so that you type some characters and click some characters. Tip: Click the Randomize button to arrange the keys in a random manner. This helps protect against screenloggers. Note: When you click a key in the Virtual Keyboard, all of the keys briefly go blank.
E To access my secure files 1. Click the Files button on menu bar of the IronKey Control Panel. • Windows: Opens Windows Explorer to the IronKey Secure Files drive. • Mac: Opens Finder to the IronKey USB drive. 2. Do one of the following: • To open a file, double-click the file on the IronKey Secure Files drive (IronKey USB drive for Mac). • To save a file, drag the file from your computer to the IronKey Secure Files drive (IronKey USB drive for Mac).
E Using the Unlocker Use the Unlocker for Linux to access your files. Depending on your Linux distribution, you may need root privileges to use the program ―ironkey.exe‖ found in the Linux folder of the mounted public volume. If you have only one IronKey device attached to the system, run the program from a command shell with no arguments (for example, ironkey.exe). If you have multiple devices, you must specify which one you want to unlock. Note: ironkey.
E 3. Permissions • You must have permissions to mount external/usb/devices. • You must have permissions to run an executable file from the public volume in order to launch the Unlocker. • You might need root user permissions. See the linux folder on the device’s public volume for information about how to set up permissions to allow non-root users to access their devices.
E USING ON-BOARD APPLICATIONS Your administrator determines the on-board applications that are installed on your device. Scanning my device for malware If enabled by your System Administrator, the IronKey Malware Scanner is a self-cleaning technology that detects and removes malware that gets on your device from an infected file or computer.
E 1. Unlock your device, and click the Settings button on the menu bar of the IronKey Control Panel. 2. Click Tools in the left sidebar. Under Device Health, click Restore Onboard Apps. MANAGING MY ONLINE ACCOUNT SETTINGS You may not have an online account if your System Administrator has not enabled this feature. Online accounts are typically created during device setup. You must have an online account to use features such as resetting a password.
The following resources provide more information about IronKey products. Please contact your Help desk or System Administrator if you have further questions. • support.ironkey.com—Support information, knowledge base and video tutorials • www.ironkey.
