Manual

Document No. iOS-MLWG3-011816.A00
MobileLite Wireless G3
Page 23 of 26
3. Click the box of the Name (SSID) you would like to change.
4. Once the preferred wireless name is ready, click ‘Save’. The MLWG3 device will restart and
disconnect you from its wireless signal. Once restarted, reconnect to the MLWG3 device using
your mobile device’s Wi-Fi settings and select the new Name (SSID).
3 & 4
How to Enable Security (WPA2)
This option helps prevent unauthorized access to your MLWG3 device by prompting you for a password.
Steps to enable security:
1. Click ‘Settings’ at the bottom of the MLW app, then click ‘MLW Setup’ and click ‘Wireless Setup’.
2. Next to ‘Enable Security’, swipe the slider to the right and enter the preferred password. Please
make sure to type the password in correctly. Using the ‘Show Password Icon’ will help by
showing you the password as you type. A factory reset of the MLW device will be required if the
password was not entered correctly.
3. Click Save. The MLWG3 will restart and disconnect you from its wireless signal. Once restarted,
reconnect to the MLWG3 and enter the new password.
2 & 3
Show
Password Icon