Manual

Document No. iOS-MLWG3-011816.A00
MobileLite Wireless G3
Page 25 of 26
3. Select a trusted Wi-Fi network. The MLW app will prompt for the Wi-Fi password of the Wi-Fi
network selected if security is enabled. The MLWG3 will restart once OK is clicked. If there is no
password, the MLW device will automatically restart.
Show
Password Icon
3
4. Once the MLWG3 has restarted, you’ll have to reconnect to the MLWG3 Wi-Fi network. To verify
that you have successfully enabled bridge mode check that the bridge status symbol at the top of
the screen is no longer grayed out. Also, if you return to the ‘Wireless Network Setup’ in
‘Settings’, you will see a red check mark next to the connected network. Here you can click the
‘x’ to forget network if desired. Finally, the bridged LED will light up on the MLWG3 device,
indicating the device has internet access.
Bridge Status
Symbol
Connected
Forget
Network
4
Bridged
LED