User's Manual


Factory Reset
After factory
resetting, all settings will be cleared.
Carefully open the bottom case of door sensor.
Press and hold the Set Button for about 20 seconds till there the status LED is green and red
blinking alternately.
Water Leak Sensor
Sensor Placement
Located
the Leak Sensor in a location that may experiencea water leak.
Door Sensor and
Leak Sensor
2017 KingTing Tech. Corporation
resetting, all settings will be cleared.
Carefully open the bottom case of door sensor.
Press and hold the Set Button for about 20 seconds till there the status LED is green and red
Water Leak Sensor
the Leak Sensor in a location that may experiencea water leak.
Leak Sensor
Press and hold the Set Button for about 20 seconds till there the status LED is green and red