User's Manual


After the test alerts, return the leak sensor to its location.
Factory Reset
After factory resetting, all settings will be cleared.
Carefully open the bottom case of Leak Sensor .
Press
and hold the Set Button for about 20 seconds till the statusLED is green and red blinking
alternately.
Door Sensor and
Leak Sensor
2017 KingTing Tech. Corporation
After the test alerts, return the leak sensor to its location.
After factory resetting, all settings will be cleared.
Carefully open the bottom case of Leak Sensor .
and hold the Set Button for about 20 seconds till the statusLED is green and red blinking
Leak Sensor
and hold the Set Button for about 20 seconds till the statusLED is green and red blinking