ATK-25U-BK/ATK-25U-S User’s Manual WWW.KINGWIN.
Package Contents: User Manual ATK-25U-BK / ATK-25U-S Enclosure Leather Case Screw Driver USB Y Cable Screw Pack Features: 2.5” SATA External Enclosure Up to 480 Mbps Data Transfer Rate in USB 2.0 Plug & Play Support Hot Swap Windows & Mac OS Compatible Rohs Compliant Specs: Model: ATK-25U-BK / ATK-25U-S H.D.D. Support: 2.5” SATA Hard Disc Dimensions: 2 ¾”W x 5 5/6”L x 5/8”H Support OS: Windows 98SE/ME/2000/XP/Vista Mac OS 10 x & Above Interface: SATA to USB 2.
Hard Drive Installation 1. Unscrew the enclosure using included screw driver. 2. Carefully pull out the rear panel. 3. Connect the 2.5” H.D.D. to the SATA connector. Make sure the drive is tightly connected.
. Insert the HDD and PCB board back to the aluminum case. 5. Secure the tray, screw the tray and the housing together using the provided screw driver.
Driver Installation Windows ME / 2000 / XP / Vista No drivers are necessary when using Windows ME/XP/2000/Vista. If the drive does not appear under “my computer”, please be sure to partition your hard drive. Windows 98 /98SE 1. Go to http://kingwin.com/download_center/uploads/215_98Driver_1.0.0.6.zip 2. Follow instruction for installing the 98 driver.
HDD Formatting Guide You may format your external HDD through USB2.0 connection. Please make sure your external HDD is turned on and well connected to the PC before formatting the HDD. 1. Right-click “My Computer” icon and select the ”Manage” column. 2. Select “Disk Management” and you will see your External HDD showed “Unallocated”.
3. Right-click on the “Unallocated” block and selects “New Partition”. 4. The “New Partition Wizard” will appear. the wizard to complete.
5. When new partition is completed, the external HDD will be recognized as a “New Volume”. 6. Double-click “My Computer”. your PC.
