BTC450 Bluetooth Car Kit User Manual © 2012 Kinivo LLC. All rights reserved. Kinivo is a trademark of Kinivo LLC. Bluetooth word mark and the Bluetooth logo are registered trademarks of Bluetooth SIG. All other trade names are registered trademarks of respective manufacturers. This manual may not be copied in any media or form without the written consent of Kinivo LLC. Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.
Table of Contents Introduction...........................................................................................3 Important Safety Instructions..............................................................3 Car Kit Overview.....................................................................................4 Package Contents...................................................................................4 Features....................................................................................
Introduction Read all safety and operation instructions before installing and using your Bluetooth car kit. Warning: To reduce the risk of fire or electric shock, do not expose this car kit to water or moisture. Important Safety Instructions 1. Do not expose the BTC450 to liquid, moisture or areas of high humidity. 2. Do not use abrasive cleaners to clean the BTC450 as they may damage the unit. Always unplug and power off the unit before cleaning. 3.
Car Kit Overview Package Contents BTC450 Bluetooth Car Kit User Manual Features 4 1. Seamlessly stream music from any Bluetooth capable device 2.
3. Connect via Bluetooth with phone to receive phone calls and use voice commands 4. Supports Bluetooth profiles: HFP, HSP, A2DP and AVRCP 5. Charge your device while listening to music via USB port Setting up the Car Kit 1. Clean the back of the receiver unit and the position in your car where you want to install the receiver. 2. Peel one side of the adhesive disc and place on back of the receiver unit. Peel other side of adhesive disc and place the receiver in ideal position in the car. 3.
Operation 1. Turning Unit On The BTC450 car kit will automatically power on when the car is switched on. 2. Adjust Volume Use car stereo controls to adjust volume levels. 3. Bluetooth Pairing a. The BTC450 Car kit will automatically enter pairing mode when powered on. If the device is not entering pairing mode, press and hold the multifunction button for 3 to 4 seconds. Activate the Bluetooth function on your device that you wish to connect to and search for and pair to the BTC450.
For all other devices Please follow your devices’ instructions on how to perform Bluetooth pairing. b. The BTC450 car kit will automatically connect with your device once initial setup is complete. 4. Charging USB Devices Simply connect charging cable of mobile device to the USB port on the car kit power adapter. 5.
Redial last number Press and release the multifunction button twice.
Powered on Blinking blue Pairing mode Alternating blinking blue and red Standby mode Slow blinking blue Troubleshooting 1. Unable to pair to device / Device no longer connects to BTC450 Ensure that the BTC450 car kit is in pairing mode by pressing and holding the multifunction button for 3 to 4 seconds (alternating blinking red and blue LED). Now open the Bluetooth configuration on the device you are trying to pair to and scan for Bluetooth devices.
Ensure that the car kit’s 3.5mm is plugged into the AUX port on your car stereo. Make sure the that the input setting on the car stereo is set to AUX input. Adjust the car stereo volume and phone volume. If at any point you are unable to resolve your issue, you can contact Kinivo Support via email at support@kinivo.com. Frequently Asked Questions 1.
kit remember? The BTC450 will remember up to four previous Bluetooth connections. When the BTC450 is powered on, it will automatically connect to the last device it was connected to. 3. Why do I get a electrical whining/humming noise in my car while using BTC450? Some cars have this electrical whining/ humming noise caused by the electrical system of the cars. We recommend that you purchase a Ground Loop Isolator to reduce this noise. 4. Help! I’m unable to use to the car kit.
Operating distance 10 meters Class II Charging input DC 12V-24V Charging output DC 5V-1A Dimensions Main unit: 42 x 15 x 42 mm Car power adapter: 24 x 54 x 24 mm Weight 35.5 g Warranty 1 Year Limited Hardware Warranty. Kinivo hereby warrants to the customer of record that this product is in goodworking condition and free from defects in material or workmanship under normal use for a duration of 1 year after the date of purchase.
This warranty is limited to repair or replacement of the mentioned product only, is non-transferable and does not extend to any product damaged by misuse, natural disasters or any other circumstances beyond Kinivo’s control. The warranty does not cover or provide for the reimbursement or payment of incidental or consequential damage resulting from breach of the limited warranty described above.
1 year limited hardware warranty Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.