Kinivo BTC450 Bluetooth Car Kit
9
Troubleshooting
1. Unable to pair to device / Device no longer connects
to BTC450
Ensure that the BTC450 car kit is in pairing mode by pressing and holding the
multifunction button for 3 to 4 seconds (alternating blinking red and blue LED).
Now open the Bluetooth conī€Ÿguration on the device you are trying to pair to
and scan for Bluetooth devices. You should see the BTC450 - proceed to pair and
connect the car kit.
Please refer to the Operation section for Bluetooth Pairing.
2. No audio when playing music or when using phone
Please make sure of all of the following
Check if the Bluetooth connection between your phone (or other Bluetooth
capable device) and the BTC450 is active.
Powered on Blinking blue
Pairing mode Alternating blinking blue and red
Standby mode Slow blinking blue